Lots

Exploring

SYSPRO's Lot Traceability system lets you track an item through the manufacturing process, providing full traceability at transactional level.

It caters for the tracking of materials through their receipt, manufacture, assembly, inspection, stocking and final distribution. Integration facilities caters for full upward and downward traceability.

Companies best suited to benefit from a lot traceable system are those in highly regulated industries for safety or health compliance (e.g. electronics, aeronautics, defense, food, pharmaceutical, medical devices and motor vehicles).

Reserving lots and serials refers to the allocation of existing lots/serials for component parts and the creation of new lots/serials for parent parts.

Within SYSPRO, reserving lots and serials represents the provisional reserving of lots/serials for a specific job to ensure that they are not used for any other job.

  • For material allocations, this means reserving or pre-allocating existing lots and serials to a job without having to physically issue them.
  • For parent parts, this means reserving lots/serials to prevent other jobs from being receipted under these numbers.

When a job is created, you can either capture lot and/or serial information against the material allocation (which will be used when you kit issue the job) or you can create lot and/or serial information for the parent part, which will be reserved and can be used when the job is receipted into stock.

SYSPRO lets you reserve both a lot and a serial number for an item at the time of creating or confirming a job. This is useful, for example, where items in a particular production run require individual serial numbers for warranty purposes, but batch lot numbers for traceability and recall purposes, and these numbers are assigned by a third-party system prior to production.

In SYSPRO you can reserve lots for parent parts (before they are receipted into stock) and you can reserve lots for allocations (before they are issued) when a job is confirmed. You can also track which component lots were used in the production of a particular parent lot.

Inspection is often only required for a sample of items rather than the entire quantity made or received. SYSPRO's flexible method of controlling the inspection of lots speeds up throughput (i.e. you can indicate whether a lot traceable item requires inspection, and whether this applies to a sample quantity only).

Topics

Bins

Serials

Bin to Serial Linkage

PDF and Video Resources

Feature Guides

Starting

The Inventory module is mandatory if you want to use the lot traceability feature. It is also typically integrated to Purchase Orders, Sales Orders and Work in Progress to control the supply chain from purchase to manufacture, service and/or sale.

Other integration points include:

  • Accounts Receivable

    Customer information is used for lot traceable items bought by the customer.

  • Inventory

    Stock codes are flagged as lot traceable and assigned a lot number which is used when recording transactions.

  • Product Configurator

    Lot traceable non-stocked items can be linked to traceable parent or component parts.

  • Purchase Orders

    Lot numbers are recorded when entering purchase orders and receipts, and when items are inspected.

  • Quotations

    Non-stocked codes which are made-in are flagged as lot traceable. Quotations are created using the non-stocked codes.

  • Return Merchandise Authorization

    Lot numbers are recorded against lot traceable items which have been returned.

  • Sales Orders

    Lot numbers are recorded when entering a sales order or raising a credit note

  • Work in Progress

    Lot numbers are recorded when adding a job, issuing material and receipting a job.

  • You can only set an item to be traceable if the quantity on hand is zero in all warehouses and there are no outstanding sales orders, purchase orders or jobs for the item.

  • You can't change a previously traceable item to be non-traceable if an on-hand quantity exists for the item in any warehouse (i.e. you can't deselect the option once transactions exist for the item).

  • SYSPRO doesn't allow negative on hand quantities for traceable items, regardless of whether stock on hand is allowed to go negative.

  • Floorstock, bulk issue and Kit type items can't be made traceable items.

  • Once a lot has been archived, you won't be able to process further transactions against the lot, unless you select to restore the files from archive.

    You won't be able to archive a lot if:

    • there's a quantity still in inspection for the lot.

    • there's a quantity reserved against the lot, even if the lot has a zero quantity on hand and the last processed date for the lot is before the date selected.

    • you enabled the option to capture lots at the end of WIP inspection (as no lot information is available until the item is accepted into stock).

  • If lots exist for a traceable item then it can't be deleted, regardless of whether the lots are archived.

    To prevent transactions from being processed against the item, you need to place the item on full hold (i.e. lot information can only be archived; never deleted).

  • You won't be able to receive items from inspection into stock if you haven't defined a WIP Inspection account (at company or warehouse level) unless you enable the inventory configuration option to request a ledger code for inventory receipt transactions.

The Setup Options program lets you configure how SYSPRO behaves across all modules. These settings can affect processing within this program.

Setup Options > Configuration > Distribution > Inventory

This depletes lots by the earliest date that a lot was received into stock. If a lot does not already exist then it retains the date of when the lot was receipted for that stock item. Upon transfer to a new warehouse, the receipt date from the original lot is used.

This depletes lots by the earliest lot expiry date. Upon transfer to a new warehouse, the receipt date is set to the transaction date. If a lot doesn't already exist, then it's created with the transaction date.

This makes adjustments to lots from the most recent FIFO bucket when running the Balance function of the Inventory Period End program. This applies only when FIFO valuation is enabled.

Setup Options > Preferences > Distribution > Inventory

This allows you to view details of actual costs used in Inventory Movements and on lot or serial transactions. Otherwise the unit cost displayed is the warehouse cost based on the costing method applied to that warehouse. If the Lot traceable or Batch serial option is selected at the Actual costing field together with this option, then it applies to all modules and a movement record is output per actual cost bucket per lot/actual cost bucket per serial.

When actual costing is by lots and you are receipting in a lot traceable item through a job, purchase order or inventory movement receipt, this option does not need to be selected for the lot to be populated against the inventory movement when the lot form field within the specific program is used (i.e., receipting in a single lot).

However, this option must be selected for inventory movements to be populated with the lot if the hyperlink to capture lots is used (i.e., receipting in a single lot or multiple lots using the Receipt Capture Details window).

Setup Options > Keys > Distribution - Inventory

This sets the lot number to be the same as the job number when processing transactions in the Job Receipts program. Both your lot and job number key types must be the same (i.e. either both must be numeric, or both must be alphanumeric). This option is only applied to co-products if the Use same lot on multiple stock codes option is enabled.

Setup Options > Configuration > Manufacturing > Lot Traceability

This prevents you from attaching a traceable component to a non-traceable parent item (ensuring that you can trace a component through all the levels as well as see where a lot has been used). You can still attach non-traceable components to a traceable parent part (e.g. you may not want to trace 'grease' as an item, but you still want to be able to use grease when making a traceable parent item). This option also affects the replacement of components.

This allows the same lot numbers to be used for different stock codes when adding new lot numbers in the Inventory, Purchase Orders and Work In Progress modules. Don't select this if you require lot numbers to be unique at company level. This option does not apply to adding lots if the Automatic lot numbering option is enabled as you won't be able to receipt in a specific lot. The option is ignored by the Job Receipts program if you enabled the Lot number to be equal to job number option.

This is the next number that will be used by the system when you select to purge and archive lot records.

Setup Options > Configuration > Manufacturing > Requirements Planning

This decreases stock on hand for expired lots when generating material requirements in the Requirements Calculation program. You will also need to enable the Stock on hand option at the Include in requirements calculation field, because the suggestions made by the system vary depending on your selections. If this field is disabled, then stock on hand for expired lots is included as stock on hand in the Requirements Calculation program.

Setup Options > Configuration > Manufacturing > Work in Progress

This allows the capture of lots numbers for jobs requiring inspection only once the item is received into stock after the inspection phase. Otherwise, you can capture lots at the time the item is received into inspection. You cannot deselect this option once WIP inspection references for traceable items are in progress. You can, however, generate a report to identify the inspection references that must still be completed.

This tracks lots from the components through to the parent part. This enables you to track which component lot numbers were used in the production of a particular parent lot (i.e. one-to-one tracking between component lots and parent item lots).

This allows components to be issued to a job using different lots/serials to the ones that were reserved for the material allocations at the time the job was confirmed.

Choose whether you want to reserve lots for parent parts and co-products when confirming a job.

This captures lots only when the job is receipted into stock.

This loads the WIP Reserve Lots & Serials Maintenance program for each traceable parent part and co-product when the job is confirmed.

This prompts the operator once only to reserve lots for parent parts and co-products upon job confirmation.

Choose whether you want to reserve lots for material allocations when confirming a job.

This captures lots only when the materials are issued to the job.

This loads the WIP Reserve Lots & Serials Maintenance program for each lot traceable component when the job is confirmed.

This prompts the operator once only to reserve lots for material allocations upon job confirmation.

Solving

You can only set an item to be traceable if the quantity on hand is zero in all warehouses and there are no outstanding sales orders, purchase orders or jobs for the item.

You can't change a previously traceable item to be non-traceable if an on-hand quantity exists for the item in any warehouse (i.e. you can't deselect the option once transactions exist for the item).

SYSPRO doesn't allow negative on hand quantities for traceable items, regardless of whether stock on hand is allowed to go negative.

Floorstock, bulk issue and Kit type items can't be made traceable items.

Once a lot has been archived, you won't be able to process further transactions against the lot, unless you select to restore the files from archive.

You won't be able to archive a lot if:

  • there's a quantity still in inspection for the lot.

  • there's a quantity reserved against the lot, even if the lot has a zero quantity on hand and the last processed date for the lot is before the date selected.

  • you enabled the option to capture lots at the end of WIP inspection (as no lot information is available until the item is accepted into stock).

If lots exist for a traceable item then it can't be deleted, regardless of whether the lots are archived.

To prevent transactions from being processed against the item, you need to place the item on full hold (i.e. lot information can only be archived; never deleted).

You won't be able to receive items from inspection into stock if you haven't defined a WIP Inspection account (at company or warehouse level) unless you enable the inventory configuration option to request a ledger code for inventory receipt transactions.

Using

Lot numbers are recorded when:

  • items are inspected and receipted into stock

  • items are issued to job

  • items have been converted or used in manufacturing and are receipted into stock

  • items are sold to the customer

The following indicates the interaction points in SYSPRO programs when processing transactions against lot traceable items.

Program Details

Sales Order Entry

This records and maintains various types of customer orders. When selling lot traceable items, you will be prompted to enter lot numbers (if manual numbering is required) bins (if multiple bins are used) and serial numbers (if serial tracking is required) in the SO Lots, Bins, Serials Allocations program. You must assign lot numbers for each traceable item before you can invoice the order or dispatch note.

RMA Issues and Receipts

When issuing lot traceable items you can optionally enter the lot number allocated during the sales transaction. Depending on the action type and the inventory action you select, the lot number will be required when ending the receipt process if you did not enter it at the time of creating the detail line. When receipting the item, a credit note is automatically created unless you select the Archive, Narration or Fix In-house action types.

The RMA entry function passes the entered lot number to the sales order, credit note or job, which you may change when maintaining the sales order, credit note or job. If you raise a credit note for traceable items against the original invoice, you can select the lines required for credit, using the invoiced lot numbers. You may select the Edit Lots function to remove the original lot allocations and replace them with alternative lot numbers.

Purchase Order Entry

, Purchase Order Receipts, Purchase Order Inspection

These programs allow you to enter a lot/serial number at the time of processing transactions against them. Defining an item as traceable or requiring inspection means that it will go through the SYSPRO two-stage receipting process when you receive it against a purchase order. This involves an inspection phase during which you may count, inspect, reject or return the stock items to the supplier. It is only when you accept the items into stock that the warehouse quantity on hand is incremented.

Quotations

and Estimates

In Quotations, you can define a non-stocked code as traceable if the part category is Made-in. At this point, marking the non-stocked code as traceable merely defines an attribute of the item and there is no link to the traceable or inventory data. Within the Estimates program, you can select to convert non-stocked codes into stock codes with lot traceability. In Product Configurator , lot traceable non-stocked items can be linked to traceable parent or component parts.

Job Entry

When creating jobs for traceable items, you need to review the Lot Traceability configuration options to see how the program handles this. If you select the Lot number to be equal to job number option then you want the lot number to be the same as the job number when processing transactions in the Job Receipts program. This helps you identify the lots related to the job (or vice versa). Both your lot and job number key types must be the same.

Job Receipts

Within Job Receipts you can select to add a single lot number against a job receipt using the Lot field. Alternatively, you can select to capture multiple lots for a job receipt using the Lot Capture program from the Lot number field. This program allows you to either manually add lots with the required quantity or automatically apply a range of lot numbers for a specific quantity. Therefore, if you are working in an environment where multiple lots are used for job receipts, it makes the capturing of lots much quicker.

Inventory Movements

You can enter a lot/serial numbers against a stock item when performing the following Inventory movement transactions:

  • Receipts

  • Adjustments

  • Backflushing

  • Goods in Transit or Warehouse Transfers

  • Bin transfers

  • Expense Issues

eSignature Setup

Electronic signatures can be defined against the following lot traceability transactions:

  • Lot number added
  • Lot number changed
  • Lot Maintenance add operation (e.net)
  • Lot Maintenance update operation (e.net)

Purge and Archive

This copies lot transactions and inspection records to an archive file, enabling you to conserve disc space. It also purges transaction details for lots that are complete (i.e. where the quantity on hand for a lot reaches zero prior to the specified archive date).

SO Lots, Bins, Serials Allocations

If you are selling a traceable item then you need to indicate the lot number from which the item must be issued.

If you indicated that you require the automatic depletion in sales orders then stock is issued automatically from the oldest and smallest available lot first.

When automatically depleting lots, the lot information is sorted in the following sequence:

  1. Date of expiry or receipt date (depending on the configuration option for depleting lots). If automatic depletion of lots is set to Expiry date and there is no expiry date on the lot, then the receipt date is used. If there is more than one lot with the oldest date then stock is allocated/reserved from the smallest lot first.

  2. Quantity available (calculated as Quantity on hand less Quantity to ship less Quantity reserved) If issues are not permitted from multiple lots then a single lot must satisfy the full ship quantity or the whole quantity is placed on back order.

    Stock is taken from the first lot that can satisfy the quantity.

    If more than one lot can satisfy the quantity then the lot with the earliest expiry or receipt date (whichever is applicable) is depleted first.

    If you subsequently reduce the order or ship quantity against an existing sales order line or after invoicing you process a partial credit note to the invoice, then you will be required to de-allocate the lots, bins and serials manually. However, if you cancel an order line or the entire order or, after invoicing you credit the entire invoice, all allocations are automatically de-allocated.

    If you do not allow stock to go negative and there is insufficient stock available, then a warning message is displayed indicating that the remaining quantity will be placed on back order. If back orders are not required, then the order line is canceled.

  3. Lot number

  4. Bin number

    The lot number and bin number are used to preserve the sequence of receipt when you receive two lots on the same day or when two lots have the same expiry date.

When automatic depletion is applied, a lot is ignored if:

  • it has been archived.
  • it is on hold.
  • there is no available stock.
  • it expires before the ship date.
  • the stock item is ECC-controlled, but the lot revision and release does not match the revision and release against the sales order line.

The following must apply if you want to be able to allocate a lot that is on hold when processing a Supply Chain Transfer using the Sales Order Entry program or processing a GIT Transfer Out transaction using the Inventory Movements program:

  • The GIT transfer of lots on hold must be allowed against your operator code.

  • The Give warning if lot is on hold preference must be enabled (Sales Order Entry).
  • The Give warning if lot is on hold preference must be enabled (Inventory Movements).

The following indicates the interaction points in SYSPRO programs when reporting and querying lot traceable items.

Program Details

Traceability Query

This allows you to view details of lots and associated transactions, including inspection and sales order details.

The transactions displayed may have occurred during the inspection process, or during the life of the lot number itself.

The Search Up function lets you establish what was used to manufacture the lot from the raw material.

The Search Down function lets you establish where the lot number was used. This query is particularly viable in industries where components and/or finished products are either high risk/hazard (e.g. pharmaceuticals/chemicals) or of a perishable nature (e.g. foods, consumables). It allows you to gain insight into how many affected parties could be involved with in the supply chain pertaining to a particular lot/serial number.

Component to Parent Tracking Query

This traces a lot from the time it was purchased or manufactured, through to its issue to a job. This enables you to establish the parent item in which the component was used.

Inventory Query

This lets you view reserved lot details.

Traceability Report

This provides details of lots and the transactions processed against them. Transactions for lots may be archived once the quantity on hand reaches zero.